Art. 187 22 ÷ 35 mm
Art. 187.1 35 ÷ 55 mm
Art. 187.2 55 ÷ 95 mm
Art. 187.3 95 ÷ 165 mm
Art. 187.4 165 ÷ 235 mm
Art. 187.5 200 ÷ 270 mm
Art. 187.6 260 ÷ 340 mm
Art. 187.7 305 ÷ 375 mm
Art. 187.8 365 ÷ 445 mm
Art. 187.9 410 ÷ 480 mm
Art. 187.10 470 ÷ 550 mm
FLAT HEAD
2 mm – h 10 mm
THICK SPACERS
4 mm – h 10 mm
THICK SPACERS
6 mm – h 10 mm
THICK SPACERS
8 mm – h 10 mm
THICK SPACERS
10 mm – h 10 mm
THICK SPACERS
The FIXED HEAD is available in the flat version or with pre-cut 2, 4, 6, 8, 10 mm spacers Ø 120 mm.
The SLEEVE EXTENSION is used for adjustable support systems from 235 mm to 550 mm.
The silencers for heads produced in sound-absorbing and non-slip rubber are designed to reduce the noise deriving from the trampling present in the raised floors, and also act as non-skid for the installed flooring. They are installed directly on the top of the head and they do not need to be fixed.
Regulating key l. 500 mm., used for paving completed only with 4 – 6 – 8 – 10 mm. spacers.
The LEVELLING SPACER (1,5 – 5 mm) can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. And can also be used to increase the final height with 5 mm.
The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.
The leveller shims, available in the 1%, 1,67% and 2% versions, are used in bases where there is a slope. Ideal to be used with our Special Light range, are placed directly on the laying surface to then be able to lay the support, thus creating a perfectly flat finished surface.
