Adjustable support Raise-up: the lowest paving support among our ranges of adjustable paving support systems. It has been studied to be used externally with raised floors where a low thickness is required. It is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.
The silencers for heads produced in sound-absorbing and non-slip rubber are designed to reduce the noise deriving from the trampling present in the raised floors, and also act as non-skid for the installed flooring. They are installed directly on the top of the head and they do not need to be fixed.
The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0.8 mm thick.
The leveling spacer, from 1,5 to 5 mm. , can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.
The Raise-up lift is applicable only on Art. 183 and 184 and allows to change the height of the base of 6 mm. obtaining the new measure 16-22 mm.
