SPECIAL
DUAL SYSTEM EVOLUTION

WITH SELF-LEVELING HEAD

 

ADJUSTABLE PAVING SUPPORT

Art. 185DSE 40 ÷ 56 mm
Art. 185.1DSE 50 ÷ 70 mm
Art. 185.2DSE 70 ÷ 110 mm
Art. 185.3DSE 110 ÷ 160 mm
Art. 185.4DSE 150 ÷ 210 mm
Art. 185.5DSE 200 ÷ 300 mm
Art. 185.6DSE 300 ÷ 400 mm
Art. 185.7DSE 400 ÷ 500 mm
Art. 185.8DSE 500 ÷ 600 mm
Art. 185.9DSE 600 ÷ 700 mm
Art. 185.10DSE 700 ÷ 800 mm
Art. 185.11DSE 800 ÷ 900 mm
Art. 185.12DSE 900 ÷ 1.000 mm

icona-pdf
DOWNLOAD THE TECHNICAL SHEET

SELF-LEVELING HEAD SPECIAL DUAL SYSTEM EVOLUTION

Self-leveling head Special Dual System Evolution, equipped with 4 couplings for quick installation of the Dual System Evolution aluminum joist.

Testa_Web
Art-186DSE_2
travetto_fh_web
travetto_fh_joist_web
JOIST JOINT SYSTEM

DUAL SYSTEM
EVOLUTION JOIST

The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.

DUAL SYSTEM EVOLUTION JOIST

The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.

travetto_fh_joist_web
JOIST JOINT SYSTEM

OPTIONAL ITEMS

Art. XDSE.02 - Art. XDSE.04

Art. XDSE.02

SPACER ELEMENT DUAL SYSTEM EVOLUTION 2 MM.

 

Art. XDSE.04

SPACER ELEMENT DUAL SYSTEM EVOLUTION 4 MM.

Spacer element, available in 2 or 4 mm, specially designed to space out the elements of the flooring; guarantees total support of the paving on the joist.

*Products that can only be used with ceramic flooring.

Art. SIL.DSE

Art. SIL.DSE

NON-SLIP SILENCER PROFILE FOR DUAL SYSTEM EVOLUTION JOIST

The silencer profile for the Dual System Evolution joist is made of sound-absorbing rubber. It is inserted into the special guides of the joist thus reducing the noise deriving from trampling and creating an non-slip effect.

 

*Products that can only be used with ceramic flooring.

Art. 186.4

Art. 186.4

SLEEVE EXTENSION

The sleeve extension is applicable on Art. 185.4DSE and allows to reach heights up to 1 metre and above, maintaining a final adjustment of 100 mm.

Art. 186.6

Art. 186.6

ITALPROFILI REGULATING KEY 50 CM

Regulating key l. 500 mm., used for paving completed with 4 – 6 – 8 – 10 mm spacers.

Art. 186.6 C

Art. 186.6 C

ITALPROFILI REGULATING KEY 25 CM

Regulating key l. 250 mm., used for paving completed
with 4 – 6 – 8 – 10 mm spacers.

Art. 190

Art. 190

PAVING SLAB HANDLER
30-35-40-45-50 CM

Art. 195

Art. 195

SUCTION CUP TILE LIFTER 110KG

Art. 186.5

ART. 186.5

LEVELLING SPACER

The leveling spacer, from 1,5 to 5 mm, can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.

Art. 185DP2 – 185DP4

Art. 185DP2 – 185DP4

PERIMETRAL SPACER STAINLESS STEEL FOR HEAD SPACER 2/4 mm

The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0.8 mm thick.

Art. 185CV2 - 185CV4

Art. 185CV2 – 185CV4

SET CLIP FOR VERTICAL CLOSURE SPACER 2/4 mm

The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.