Art. 187DSE 22 ÷ 35 mm
Art. 187.1DSE 35 ÷ 55 mm
Art. 187.2DSE 55 ÷ 95 mm
Art. 187.3DSE 95 ÷ 165 mm
Art. 187.4DSE 165 ÷ 235 mm
Art. 187.5DSE 200 ÷ 270 mm
Art. 187.6DSE 260 ÷ 340 mm
Art. 187.7DSE 305 ÷ 375 mm
Art. 187.8DSE 365 ÷ 445 mm
Art. 187.9DSE 410 ÷ 480 mm
Art. 187.10DSE 470 ÷ 550 mm
Fixed head Special Light Dual System Evolution, equipped with 4 couplings for quick installation of the Dual System Evolution aluminum joist.
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
Spacer element, available in 2 or 4 mm, specially designed to space out the elements of the flooring; guarantees total support of the paving on the joist.
*Products that can only be used with ceramic flooring.
The silencer profile for the Dual System Evolution joist is made of sound-absorbing rubber. It is inserted into the special guides of the joist thus reducing the noise deriving from trampling and creating an non-slip effect.
*Products that can only be used with ceramic flooring.
The sleeve extension is used for adjustable support systems from 235 mm to 550 mm.
Regulating key l. 500 mm., used for paving completed with 4 – 6 – 8 – 10 mm spacers.
Regulating key l. 250 mm., used for paving completed with 4 – 6 – 8 – 10 mm spacers.
The leveling spacer, from 1,5 to 5 mm, can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.
The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0.8 mm thick.
The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.
The leveller shims, available in the 1%, 1,67% and 2% versions, are used in bases where there is a slope. Ideal to be used with our Special Light range, are placed directly on the laying surface to then be able to lay the support, thus creating a perfectly flat finished surface.
