RAISE-UP
DUAL SYSTEM EVOLUTION
WITH FIXED HEAD
ADJUSTABLE PAVING SUPPORT
Art. 183DSE 10 ÷ 16 mm
Art. 183.1DSE 16 ÷ 22 mm
Art. 183DSE 10 ÷ 16 mm
Art. 183.1DSE 16 ÷ 22 mm
Art. 183DSE 10 ÷ 16 mm
Art. 183.1DSE 16 ÷ 22 mm
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
Spacer element, available in 2 or 4 mm, specially designed to space out the elements of the flooring; guarantees total support of the paving on the joist.
*Products that can only be used with ceramic flooring.
The silencer profile for the Dual System Evolution joist is made of sound-absorbing rubber. It is inserted into the special guides of the joist thus reducing the noise deriving from trampling and creating an non-slip effect.
*Products that can only be used with ceramic flooring.
The leveling spacer, from 1,5 to 5 mm, can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.
The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0.8 mm thick.
The Raise-up lift is applicable only on Art. 183DSE and allows to change the height of the base of 6 mm. obtaining the new measure 16-22 mm.