Art. 185FHDSE 40 ÷ 56 mm
Art. 185.1FHDSE 50 ÷ 70 mm
Art. 185.2FHDSE 70 ÷ 110 mm
Art. 185.3FHDSE 110 ÷ 160 mm
Art. 185.4FHDSE 150 ÷ 210 mm
Art. 185.5FHDSE 200 ÷ 300 mm
Art. 185.6FHDSE 300 ÷ 400 mm
Art. 185.7FHDSE 400 ÷ 500 mm
Art. 185.8FHDSE 500 ÷ 600 mm
Art. 185.9FHDSE 600 ÷ 700 mm
Art. 185.10FHDSE 700 ÷ 800 mm
Art. 185.11FHDSE 800 ÷ 900 mm
Art. 185.12FHDSE 900 ÷ 1.000 mm
Fixed head Special Dual System Evolution, equipped with 4 couplings for quick installation of the Dual System Evolution aluminum joist.
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
– 15 mm: the lowest thickness avaible on the market.
– 25 mm: for an even higher load capacity.
Spacer element, available in 2 or 4 mm, specially designed to space out the elements of the flooring; guarantees total support of the paving on the joist.
*Products that can only be used with ceramic flooring.
The silencer profile for the Dual System Evolution joist is made of sound-absorbing rubber. It is inserted into the special guides of the joist thus reducing the noise deriving from trampling and creating an non-slip effect.
*Products that can only be used with ceramic flooring.
The sleeve extension is applicable on Art 185.4FHDSE and allows to reach heights up to 1 metre and above, maintaining a final adjustment of 100 mm.
Regulating key l. 500 mm., used for paving completed with 4 – 6 – 8 – 10 mm spacers.
Regulating key l. 250 mm., used for paving completed with 4 – 6 – 8 – 10 mm spacers.
The leveling spacer, from 1,5 to 5 mm, can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.
The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0.8 mm thick.
The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.
