Skip to main content

ANTI‑BACKUP ROOF DRAIN IN WHITE TPO

ANTI‑BACKUP ROOF DRAIN IN WHITE TPO

Art. 1.3 B - Art. 13.3 B - Art. 21.3 B - Art. 14P B - Art. 22.3 B - Art. 16.3 B - Art. 23.3 B - Art. 17P B - Art. 112P B
Art. 1.3 B - Art. 13.3 B - Art. 21.3 B - Art. 14P B - Art. 22.3 B - Art. 16.3 B - Art. 23.3 B - Art. 17P B - Art. 112P B

The ANTI-BACKUP ROOF DRAIN IN TPO, available in white colour, is one of the most valid systems for connecting rainwater pipes and drains on flat roofs, gutters of multi-pitched roofs and industrial buildings. It is used for application on roofs waterproofed with TPO membranes. This particular item has been studied right down to its smallest details so as to optimize its characteristics thus eliminating problems caused by traditional drains available in the market. The drain is made of soft, flexible and UV stabilized TPO. It offers high physical, chemical and technical properties as well as a flexible product. It is highly resistant to UV rays, ozone and other atmospheric and chemical agents. It can be used in a wide temperature range and is extremely flexible at low temperatures, it is stable over time thanks to the physical and mechanical properties, which therefore assure maximum performance throughout its lifespan.
The drain consists of a truncated body available in various diameters solidly attached to a smooth flange. The stem piece of the unit has two or more strategically placed circular ribs which face outwards which when forced into the drain pipe prevent backing-up of water forming a perfect seal. The seal rings are compressed upwards when inserted into the downpipe guaranteeing an optimal seal with any type of pipe.
The presence of the external seal rings avoid the passage of water vapour or back-up water into the roofing build-up, this is particularly important where insulation is involved as it could compromise the insulation, factor that constitutes one of the main problems in roof waterproofing.

  • ROOF DRAIN CODES
    ArticleDescription
    1.3 B
    Ø 60 h. mm. 250
    13.3 B
    Ø 75 h. mm. 250
    21.3 B
    Ø 80 h. mm. 250
    14P B
    Ø 90 h. mm. 250
    22.3 B
    Ø 100 h. mm. 250
    16.3 B
    Ø 110 h. mm. 250
    23.3 B
    Ø 125 h. mm. 250
    17P B
    Ø 140 h. mm. 250
    112P B
    Ø 160 h. mm. 250
Article codes
  • ROOF DRAIN CODES
    ArticleDescription
    1.3 B
    Ø 60 h. mm. 250
    13.3 B
    Ø 75 h. mm. 250
    21.3 B
    Ø 80 h. mm. 250
    14P B
    Ø 90 h. mm. 250
    22.3 B
    Ø 100 h. mm. 250
    16.3 B
    Ø 110 h. mm. 250
    23.3 B
    Ø 125 h. mm. 250
    17P B
    Ø 140 h. mm. 250
    112P B
    Ø 160 h. mm. 250

Optional items

  • LEAF GRATE 4 POLES
    Leaf grate 4 poles suitable for Ø 60-110 mm.
    25
    Leaf grate 4 poles for Ø 60-110 mm.
  • “NUOVA” LEAF GRATE
    The leaf grate "Nuova" Art. 26, suitable for roof drains with diameters from 75 mm to 125 mm, it is made from thermoplastic material and is resistant to degradation caused by the sun, ozone and other atmospheric and chemical agents. The attachment to the roof drain is optimized by the small hooks present on the inserts of the leaf grate.
    26
    “Nuova” leaf grate for Ø 75-125 mm.
  • LEAF AND GRAVEL GRATE Ø 60-160
    The leaf and gravel grate Art. 24. is suitable for roof drains with diameters from 60 mm. to 160 mm. It has an internal threaded centre piece of the same height as the leaf/gravel grate its self into which Art. 24.1 is screwed. It is made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.
    24
    Leaf/gravel grate for Ø 60-160 mm.
  • TRIPLE SUPPORT FOR GRAVEL GRATE Ø 60-200
    The triple support Art. 24.1, compatible with leaf/gravel grates Art. 24 and Art. 24.2, must be inserted into the roof drain. If necessary, and in particular with smaller diameters, cut the anchoring tabs to suit the diameter the tabs should fit tightly and not bend. It is made of thermoplastic material resistant to degradation caused by the sun, ozone, and other atmospheric and chemical agents.
    24.1
    Triple support for gravel grate for Ø 60-200 mm.
  • PERFORATED RING FOR Ø 60-160
    The perforated ring Art. 82 has been specially designed to weld on the ITALPROFILI® leaf gravel grate. It can be installed on any surface waterproofed with modified bitumen membranes such as APP, SBS, or spread bitumen. It is made of IGOM.EE, a synthetic rubber compound produced by ITALPROFILI®, which offers high technical, chemical, and physical characteristics that meet all the needs of a resilient and durable product. The perforated ring is equipped with punches on the lower part. The surface has conical holes and three hooks to secure the gravel grate art. 24.
    82
    Perforated ring for Ø 60-160 mm.
  • LEAF AND GRAVEL GRATE Ø 60-200
    The leaf and gravel grate Art. 24.2 is suitable for roof drains with diameters from 60 mm. to 200 mm. It has an internal threaded centre piece of the same height as the leaf/gravel grate its self into which Art. 24.1 is screwed. It is made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.
    24.2
    Leaf/gravel grate for Ø 60-200 mm.
  • TPO BUTTONHOLE PLATES
    TPO buttonhole plates for gravel grate
    24.3P
    TPO buttonhole plates for gravel grate
  • HEATER ELEMENT
    Heater element L. mm. 200
    119.1
    Heater element L. mm. 200
  • Technical Data Sheet
    Do you need support? Contact us
    Installation method
    Do you need support? Contact us
    Stay updated with our newsletter
    INTRODUCING
    logo-outenthia

    We have always given space form and support. Now we broaden our view to Outdoor Living.

    DISCOVER OUTENTHIA
    logo-italprofili