Skip to main content

SPECIAL LIGHT
DUAL SYSTEM EVOLUTION

SPECIAL LIGHT
DUAL SYSTEM EVOLUTION

WITH FIXED HEAD

The ADJUSTABLE PAVING SUPPORTS SPECIAL LIGHT DUAL SYSTEM EVOLUTION can be used externally for the installation of raised outdoor floors, both with ceramic finish and decking, thanks to the Dual System Evolution joist.
It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes.
For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc.
The adjustable paving supports Special Light Dual System Evolution are produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

FIXED HEAD SPECIAL LIGHT
DUAL SYSTEM EVOLUTION

Fixed head Special Light Dual System Evolution, equipped with 8 couplings for quick installation of the Dual System Evolution aluminum joist. It is equipped with the Locking Head system.

DUAL SYSTEM EVOLUTION
JOIST

The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance.
It is available in two variations:
• 15 mm: the lowest thickness avaible on the market
• 25 mm: for an even higher load capacity.

  • PAVING SUPPORT CODES
    ArticleHeight
    187DSE
    from 22 to 35 mm.
    187.1DSE
    from 35 to 55 mm.
    187.2DSE
    from 55 to 95 mm.
    187.3DSE
    from 95 to 165 mm.
    187.4DSE
    from 165 to 235 mm.
    187.5DSE
    from 200 to 270 mm.
    187.6DSE
    from 260 to 340 mm.
    187.7DSE
    from 305 to 375 mm.
    187.8DSE
    from 365 to 445 mm.
    187.9DSE
    from 410 to 480 mm.
    187.10DSE
    from 470 to 550 mm.
  • HEAD CODE
    ArticleDescription
    188DSE
    fixed for Dual System Evolution joist
  • JOIST CODES
    ArticleHeight
    6215DSE
    15 mm.
    6225DSE
    25 mm.
    6225GP
    27 mm.
Article codes
  • PAVING SUPPORT CODES
    ArticleHeight
    187DSE
    from 22 to 35 mm.
    187.1DSE
    from 35 to 55 mm.
    187.2DSE
    from 55 to 95 mm.
    187.3DSE
    from 95 to 165 mm.
    187.4DSE
    from 165 to 235 mm.
    187.5DSE
    from 200 to 270 mm.
    187.6DSE
    from 260 to 340 mm.
    187.7DSE
    from 305 to 375 mm.
    187.8DSE
    from 365 to 445 mm.
    187.9DSE
    from 410 to 480 mm.
    187.10DSE
    from 470 to 550 mm.
  • HEAD CODE
    ArticleDescription
    188DSE
    fixed for Dual System Evolution joist
  • JOIST CODES
    ArticleHeight
    6215DSE
    15 mm.
    6225DSE
    25 mm.
    6225GP
    27 mm.

Optional items

  • LIFTER SPECIAL LIGHT EXTENSION
    Lifter Special Light is the new extension by Italprofili that makes the Special Light paving supports modular. Available in three versions, 10, 30 and 70 mm., it has been designed to extend the screw until reaching the desired height. It can be used individually or assembled with multiple elements, stackable together. Easy to assemble, it is applied directly above the screw of the support, rotating clockwise to activate the patented locking system, which allows it to become a single piece with the latter.
    188L10
    Extension Lifter Special Light h. 10 mm.
    188L30
    Extension Lifter Special Light h. 30 mm.
    188L70
    Extension Lifter Special Light h. 70 mm.
  • DUAL SYSTEM EVOLUTION JOIST 15 MM. AND 25 MM.

    The Dual System Evolution joist can be used as a single product for laying ceramic and decking flooring. Produced in extruded aluminum, it guarantees maximum durability, reduced weight and high resistance. It is available in two variations: 15 mm: the lowest thickness avaible on the market; 25 mm: for an even higher load capacity.

    6215DSE

    Dual System Evolution aluminium joist mm. 62x15

    6225DSE

    Dual System Evolution aluminium joist mm. 62x25

  • Aluminium joist mm. 62x25 preforated with non-slip silencer profile

    Extruded aluminum joist 62x25 mm, perforated to ensure rapid water drainage, with integrated non-slip silencer profile. Usable only with ceramic finish.

    6225GP

    Joist mm. 65x25 preforated with silencer

  • LINEAR JUNCTION FOR DUAL SYSTEM EVOLUTION JOIST 15 AND 25 MM.

    Joint compatible with the Dual System Evolution aluminum joist h. 15 mm. and 25 mm. Made of polypropylene, it is inserted directly between the joists thus acting as a connection.

    J-DSE15

    Linear junction for Dual System Evolution joist h. 15 mm

    J-DSE25

    Linear junction for Dual System Evolution joist h. 25 mm

  • SPACER ELEMENT DUAL SYSTEM EVOLUTION 2 AND 4 MM.
    Spacer element, available in 2 or 4 mm., specially designed to space out the elements of the flooring; guarantees total support of the paving on the joist.
    XDSE.02
    Spacer element Dual System Evolution 2 mm
    XDSE.04
    Spacer element Dual System Evolution 4 mm
  • NON-SLIP SILENCER PROFILE FOR DUAL SYSTEM EVOLUTION JOIST
    The silencer profile for the Dual System Evolution joist is made of sound-absorbing rubber. It is inserted into the special guides of the joist thus reducing the noise deriving from trampling and creating an non-slip effect.
    SIL.DSE
    Non-slip silencer profile for Dual System Evolution joist
  • SLEEVE EXTENSION SPECIAL LIGHT
    The sleeve extension is used for adjustable support systems from 235 mm to 550 mm.
    188.4
    Sleeve extension Special Light
  • LEVELING SPACER
    The leveling spacer, from 1,5 to 5 mm, can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. It can also be used to increase the final height with 5 mm.
    186.5
    Leveller
  • ITALPROFILI REGULATING KEY 25 AND 50 CM.
    Regulating key used for paving completed with 4-6-8-10 mm spacers. Available in 25 or 50 cm.
    186.6
    Italprofili regulating key for adjustable paving supports 50 cm.
    186.6 C
    Italprofili regulating key for adjustable paving supports 25 cm.
  • REGULATING KEY MX
    Metallic regulating key, resistant to torsion with practical built-in tabs breaker. It can be used after flooring is complete with 4-6-8-10 mm spacers.
    186MX
    Italprofili regulating key MX
  • REGULATING INSERT
    Regulating insert for screwdrivers. It can be used with 4-6-8-10 mm spacers.
    IR186
    Regulating insert
  • SET CLIP VERTICAL CLOSURE 2-4 MM.
    The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0,8 mm thick stainless steel, they are available with 2 or 4 mm spacers.
    185CV2
    Set clip for vertical closure spacer mm. 2
    185CV4
    Set clip for vertical closure spacer mm. 4
  • PERIMETRAL SPACER STAINLESS STEEL FOR HEAD 2 AND 4 MM.

    The perimetral spacer is laid directly on the head allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter. Suitably shaped to avoid the rubbing of the pavement on the vertical containment perimeter and to absorb any movement and expansion of the pavement. Made of stainless steel, 0,8 mm thick., is available for spacer tabs 2 and 4 mm.

    185DP2

    Perimetral spacer in stainless steel for head spacer mm. 2

    185DP4

    Perimetral spacer in stainless steel for head spacer mm. 4

  • UNIVERSAL PERIMETRAL SPACER 2-4 MM IN. POLYPROPYLENE
    The perimetral spacer in polypropylene, suitable for 2 and 4 mm spacer-tabs, is laid directly above the head of the support, allowing to keep the flooring of a distance of 5 mm from the vertical containment perimeter.
    185DPU
    Perimetral spacer Universal 2-4 mm. in in polypropylene
  • LEVELLER SHIMS

    The leveller shims, available in the 1%, 1,67% and 2% versions, are used in bases where there is a slope. Ideal to be used with our Special Evolve and Special Light ranges, are placed directly on the laying surface to then be able to lay the support, thus creating a perfectly flat finished surface.

    187CL1

    Leveller shims 1%

    187CL1.67

    Leveller shims 1,67%

    187CL2

    Leveller shims 2%

  • PAVING SLAB HANDLER
    Adjustable paving slab handler 40 to 60 cm.
    190.1
    Adjustable paving slab handler 40 to 60 cm.
  • TILE LIFTER
    Italprofili tile lifter for spacers from 4 mm
    191
    Italprofili tile lifter for spacers from 4 mm.
  • SUCTION CUP TILE LIFTER
    Suction cup tile lifter 110kg.
    195
    Suction cup tile lifter 110kg.
  • PROTECTIVE PAD IN RECYCLED RUBBER 3/5 MM

    Pro-sil is a pad made of recycled rubber, measuring  200x200 mm, available in 3 or 5 mm. thickness. It is laid  directly on the installation surface in correspondence  with the support and serves a dual purpose:

    • to protect the waterproofing layer,of any kind
    • to reduce the noise caused by foot traffic on raised floors
    PRO-SIL.03

    Protective pad in recycled rubber 3 mm.

    PRO-SIL.05

    Protective pad in recycled rubber 5 mm.

  • TECHNICAL DATA SHEET
    Do you need support? Contact us
    Installation method
    Do you need support? Contact us
    Stay updated with our newsletter
    INTRODUCING
    logo-outenthia

    We have always given space form and support. Now we broaden our view to Outdoor Living.

    DISCOVER OUTENTHIA
    logo-italprofili