ITAL C-PVC CONTACT ADHESIVE

For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing that is available in Black, Gray, Tan and White. With the exception of surface prep, RoofSeal/One-Step is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/OneStep remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the seam causing a leak. RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.

RoofSeal/OneStep utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a UV stable backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.

Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.