COPPERFLASH REPAIR AND SEALING TAPE

For use on virtually all roofs, walls, floors, gravity tanks, troughs, etc. UV stable and moisture tight, AlumiBond creates an air and vapor barrier. The thick 4 mil aluminum backing combined with an advanced MicroSealantTM creates a hard surface. AlumiBond bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, singleply roofing, etc. AlumiBond remains flexible to temperatures as low as -56°C making it virtually impossible to thermally shock the roof causing a leak. Duct Sealing Tape AlumiBond is a high grade aluminum foil with a hybrid Sealant. Fuses to rigid ductwork. Will never harden, crack or peel and fall off like other duct sealing products. Lasts as long as the ductwork!

AlumiBond tape is designed for use on metal buildings, trailer/RV roofs and sides, drain pans, drain pipes, duct-work, boats, canoes, and as a protective coating for surfaces where abrasion and corrosion resistance is required. AlumiBond seals to itself so it can be cut and folded around an object.

AlumiBond utilizes an advanced MicroSealantTM Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a built-in primer. It is bonded to a 4-mil aluminum metal backing.The adhesive coating is protected by a silicone release liner, to be removed prior to application.

Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.