Art. 185 40 ÷ 56 mm
Art. 185.1 50 ÷ 70 mm
Art. 185.2 70 ÷ 110 mm
Art. 185.3 110 ÷ 160 mm
Art. 185.4 150 ÷ 210 mm
Art. 185.5 200 ÷ 300 mm
Art. 185.6 300 ÷ 400 mm
Art. 185.7 400 ÷ 500 mm
Art. 185.8 500 ÷ 600 mm
Art. 185.9 600 ÷ 700 mm
Art. 185.10 700 ÷ 800 mm
Art. 185.11 800 ÷ 900 mm
Art. 185.12 900 ÷ 1.000 mm
2 mm – h 10 mm
FLAT HEAD
2 mm – h 10 mm
THICK SPACERS
4 mm – h 10 mm
THICK SPACERS
6 mm – h 10 mm
THICK SPACERS
8 mm – h 10 mm
THICK SPACERS
10 mm – h 10 mm
THICK SPACERS
The SELF-LEVELLING HEAD is available in flat version or with pre-cut 2, 4, 6, 8, 10 mm spacers and Ø 130 mm. is especially advantageous when installing on an inclined surface, since the support can be placed directly on the inclined surface without the need for any supplementary components.
This feature makes it possible to provide automatic levelling for inclinations up to 9%.
Inserted directly into the self-levelling head they have a minimum thickness of 4 mm. and keep the flooring at a distance from the external perimeter; this prevents the flooring from rubbing against the waterproofing membrane where it is applied with a folded edge against the vertical wall, and prevents the accumulation of dirt, which might impede the drainage of rainwater. Since the spacers can be stacked, the thickness of 4 mm. can also be multiplied.
The SLEEVE EXTENSION is applicable on Art. 185.4 and allows to reach heights up to 1 metre and above, maintaining a final adjustment of 100 mm.
The silencers for heads produced in sound-absorbing and non-slip rubber are designed to reduce the noise deriving from the trampling present in the raised floors, and also act as non-skid for the installed flooring. They are installed directly on the top of the head and they do not need to be fixed.
Regulating key l. 500 mm., used for paving completed only with 4,6,8,10 mm. spacers.
The LEVELLING SPACER (1,5 – 5 mm) can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. And can also be used to increase the final height with 5 mm.
The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.
