special MF with
multifunctional head

FLOORINGS

ADJUSTABLE SUPPORT SYSTEM

Art. 185MF 40 ÷ 56 mm
Art. 185.1MF 50 ÷ 70 mm
Art. 185.2MF 70 ÷ 110 mm
Art. 185.3MF 110 ÷ 160 mm
Art. 185.4MF 150 ÷ 210 mm
Art. 185.5MF 200 ÷ 300 mm
Art. 185.6MF 300 ÷ 400 mm
Art. 185.7MF 400 ÷ 500 mm
Art. 185.8MF 500 ÷ 600 mm
Art. 185.9MF 600 ÷ 700 mm
Art. 185.10MF 700 ÷ 800 mm
Art. 185.11MF 800 ÷ 900 mm
Art. 185.12MF 900 ÷ 1.000 mm

MULTIFUNCTIONAL HEAD

2 mm – h 10 mm

THICK SPACERS

2 mm – h 20 mm

THICK SPACERS

multifunctional head

The multifunctional head has been designed to be used with any type of raised, ceramic, cementitious or decking floors with joist support structure thanks to its adjustable spacers. Self-leveling up to a maximum of 9% + – with 4 mm thicks. Height 10 or 20 mm. If the fixed head is needed, it is possible to use the locking ring art. 186.2.

OPTIONAL ITEMS

ART. 186.3

ART. 186.3

PERIMETRAL SPACER

Inserted directly into the self-levelling head they have a minimum thickness of 4 mm. and keep the flooring at a distance from the external perimeter; this prevents the flooring from rubbing against the waterproofing membrane where it is applied with a folded edge against the vertical wall, and prevents the accumulation of dirt, which might impede the drainage of rainwater. Since the spacers can be stacked, the thickness of 4 mm. can also be multiplied.

ART. 186.4

ART. 186.4

SLEEVE EXTENSION

The SLEEVE EXTENSION is applicable on Art. 185.4 and allows to reach heights up to 1 metre and above, maintaining a final adjustment of 100 mm.

ART. 186.2

ART. 186.2

HEAD LOCKING RING

The head locking ring allows to make the self-levelling head MF fixed.

ART. 186.6

ART. 186.6

REGULATING KEY

Regulating key l. 500 mm., used for paving completed.

ART. 186.5

ART. 186.5

LEVELLING SPACER

The LEVELLING SPACER (1,5 – 5 mm) can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. And can also be used to increase the final height with 5 mm.

ART. 185CV4

ART. 185CV4

SET CLIP FOR VERTICAL CLOSURE SPACE 2/4 mm

The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.

ART. 190

ART. 190

PAVING SLAB HANDLER 30-35-40-45-50 CM