special FH with fixed
head

PREFABRICATED SLABS

ADJUSTABLE SUPPORT SYSTEM

Art. 185FH 40 ÷ 56 mm
Art. 185.1FH 50 ÷ 70 mm
Art. 185.2FH 70 ÷ 110 mm
Art. 185.3FH 110 ÷ 160 mm
Art. 185.4FH 150 ÷ 210 mm
Art. 185.5FH 200 ÷ 300 mm
Art. 185.6FH 300 ÷ 400 mm
Art. 185.7FH 400 ÷ 500 mm
Art. 185.8FH 500 ÷ 600 mm
Art. 185.9FH 600 ÷ 700 mm
Art. 185.10FH 700 ÷ 800 mm
Art. 185.11FH 800 ÷ 900 mm
Art. 185.12FH 900 ÷ 1.000 mm

FIXED HEAD

2 mm – h 10 mm

FLAT HEAD

2 mm – h 10 mm

THICK SPACERS

4 mm – h 10 mm

THICK SPACERS

6 mm – h 10 mm

THICK SPACERS

8 mm – h 10 mm

THICK SPACERS

10 mm – h 10 mm

THICK SPACERS

fixed head

The FIXED HEAD is available in the flat version or with pre-cut 2, 4, 6, 8, 10 mm spacers Ø 130 mm.

OPTIONAL ITEMS

ART. 186.3

ART 186.3

PERIMETRAL SPACER

Inserted directly into the self-levelling head they have a minimum thickness of 4 mm. and keep the flooring at a distance from the external perimeter; this prevents the flooring from rubbing against the waterproofing membrane where it is applied with a folded edge against the vertical wall, and prevents the accumulation of dirt, which might impede the drainage of rainwater. Since the spacers can be stacked, the thickness of 4 mm. can also be multiplied.

ART. 186.4

ART 186.4

SLEEVE EXTENSION

The SLEEVE EXTENSION is applicable on Art. 185.4 and allows to reach heights up to 1 metre and above, maintaining a final adjustment of 100 mm.

ART. 185HS

ART 185HS

NON-SLIP HEAD SILENCER

The silencers for heads produced in sound-absorbing and non-slip rubber are designed to reduce the noise deriving from the trampling present in the raised floors, and also act as non-skid for the installed flooring. They are installed directly on the top of the head and they do not need to be fixed.

ART. 186.6

ART. 186.6

REGULATING KEY

Regulating key l. 500 mm., used for paving completed only with 4 – 6 – 8 – 10 mm. spacers.

ART. 186.5

ART. 186.5

LEVELLING SPACER

The LEVELLING SPACER (1,5 – 5 mm) can be used as a whole, and can also be stacked or sectioned by ½ or ¼. These components are used when the support surface is extremely irregular or to compensate for the differences in level created by overlaps in the waterproofing layer. And can also be used to increase the final height with 5 mm.

ART. 185CV2-185CV4

ART. 185CV2-185CV4

SET CLIP FOR VERTICAL CLOSURE SPACE 2/4 mm

The Italprofili set clip for vertical closure is designed to give a strong and aesthetically pleasing attachment to the closing of the vertical perimeter edges in raised floors, thus creating a perimeter containment for the flooring. Made of 0.8 mm thick stainless steel, they are available with 2 or 4 mm spacers.

ART. 190

ART. 190

PAVING SLAB HANDLER 30-35-40-45-50 CM